User manual

Introduction
4
NXA-ENET24 Hardware Installation Guide
Port Status LEDs
LED Condition Status
1~24
(Link/Act Mode)
On/Flashing Green Port has established a valid 100 Mbps network connection. Flash-
ing indicates activity.
On/Flashing Amber Port has established a valid 10 Mbps network connection. Flashing
indicates activity.
Alternate Green/Amber Port has been disabled by the administrator.
Off There is no valid link on the port.
1~24
(PoE Mode)
On Green Powered device is connected, but not drawing power.
Flashing Green Powered device is receiving power.
Flashing Amber Port has detected a power overload or short circuit and shut down
the port’s power.
On Amber The power budget for the switch has been exceeded and the port's
power shut down.
Alternate Green/Amber Port has been disabled by the administrator.
Off No powered device is connected to the port.
FIG. 3
System LEDs
Link/Act
PoE
25
26
PWR
Diag
Stacking
Mode
PoE/Link
System Status LEDs