Specifications

Wiring and Device Connections
17
Vision
2
Operation/Reference Guide
WMV Appliance Rear Panel Connections
This section details the ports and connectors on the rear panel of the Vision
2
WMV appliance:
HD-15 Port
The HD-15 input connector is used for WMV source streams.
FIG. 6 displays the location of the HD-15 WMV port on the rear of the Vision
2
WMV appliance.
The following tables list the HD-15 connector pinouts for WMV streams.
Use the male HD-15 port for WMV source streams. The female HD-15 port is
available for an output device such as a PC monitor.
FIG. 6 WMV port (WMV appliance)
HD-15 Connector Pinouts
Pin Signal Function
1 Red Red signals
2 Green Green signals
3 Blue Blue signals
4 Sense 2 Monitor ID bit 2
5 GND Signal Ground
6 RAGND Red analog ground
7 GAGND Green analog ground
8 BAGND Blue analog ground
9 N/A Not used
10 SAGND Synchronization analog ground
11 Sense 0 Monitor ID bit 0
12 Sense 1 Monitor ID bit 1
13 HSYNC Horizontal synchronization signal
14 VSYNC Vertical synchronization signal
15 Sense 3 Monitor ID bit 3
12345
678910
11 12 13 14 15
1
5
6
10
11
15