User's Manual

Installing Wall-Mount (MXD) Panels
63
Modero X® Series Touch Panels - Installation & Hardware Reference Manual
FIG. 56 provides an illustration of the MXD-430 mounting into a drywall surface:
Leave enough slack in the wiring to accommodate any re-positioning of the panel.
4. Remove the knockout on the bottom of the Backbox (FIG. 54) and thread the incoming wiring through the knockout hole.
5. Push the Backbox into the mounting surface. Insure that the locking tabs lie flush against the Backbox and that the Backbox
goes freely into the opening.
FIG. 55
MXD-430 Backbox Installation - Solid Surface
FIG. 56 MXD-430 Backbox Installation - Drywall Surface