User's Manual

Modero X Series (G4) Touch Panels
12
Modero X® Series Touch Panels - Installation & Hardware Reference Manual
Preview Mode and Normal Mode
Picture View has two modes: Preview Mode and Normal Mode. Preview Mode allows the user to configure Picture View. Once a USB
drive containing images is inserted into the panel, the images will begin to display. Touching any place on the display will result in
the configuration popup to slide from the bottom of the display.
Picture View goes into its Normal Mode when the panel goes into idle timeout while connected to a USB drive. Normal Mode
displays images until the touchscreen is touched, or some other wakeup event is detected. When the device goes back into timeout,
Normal Mode will return to displaying images until the USB drive is removed from the device.
Picture View Send Command (^PIC)
The ^PIC Send Command stops either mode of Picture View, or starts Preview Mode. For more information, please refer to the
Modero X/S Series G4 Touch Panels Programming Guide, available at www.amx.com.
NOTE: All images must be in JPEG format. PNG and other image formats cannot be viewed through Picture View.
Cleaning the Touch Overlay and Case
Modero X Series touch panels come with the MXA-CLK Modero X Series Cleaning Kit (FG5968-16), which may be used to clean
fingerprints and dirt from the device. This kit comes with cleaning cloths and a bottle of cleaning fluid specifically for use with the
device.
When cleaning the device, do not directly spray the device with cleaning fluid. Instead, spray the cloth and then apply the
cloth to the touch screen.
Do not use abrasives of any type to clean the device, as abrasives may permanently damage or remove the device’s finish.
FIG. 5
Picture View Configuration Popup Menu
Previous image
Stop Pause/Resume
Next image
Counter
Random / A-Z Timer