Technical information

Configuration Wizard
30
RMS Quick Start Guide
The default syslog IP port is 514 and does not need to be changed unless you
have a custom Syslog configuration.
You can test Syslog messages by setting some sample text in the Test Message
Severity field, and clicking the Te s t button.
After you have selected the desired Syslog options, click Next to continue.
Reporting
The RMS application suite can provide detailed reporting on room device and
parameter changes based on a tracked history.
Place a check next to Enable Reporting to allow for this function. You must also
specify the number of days for the RMS application suite to track. Note, the
larger the number of days, the greater the number of records the database needs
to store and the longer report queries take to run. The default is 90 days.
After you have selected the desired reporting options, click Next to continue.
Time Sync
The RMS application suite can maintain time and date synchronization between
the RMS server and the remote NetLinx systems.
Synchronize NetLinx System Time/Date: if this option is enabled, the RMS
application suite server synchronizes the time and date on NetLinx systems upon
connection and subsequently once each evening. This option is recommended to
maintain a consistent time and date throughout the system.
Synchronize Server Time/Date: if this option is enabled, the RMS application
suite server connects to an Internet time synchronization server once per evening
and synchronizes the server local time and date. This option is recommended
SYSLOG Options
Enable SYSLOG Messaging Select the Enable SYSLOG Messaging to enable Syslog
messages.
Syslog Server Address/Port Enter the IP address or host name for the Syslog server.
Enter the IP port for the Syslog server.
Syslog Facility ID Select the facility from the drop down list.
Test Message Severity Select from the drop-down list the message level severity.
Test Message Text field for the message to be sent.