Technical information

Configuration Wizard
27
RMS Quick Start Guide
SMTP
SMTP or Simple Mail Transport Protocol is the standard for sending email on the
Internet. The RMS application suite uses SMTP for sending email notifications
to users.
Enter all the appropriate SMTP settings.
You can test these SMTP setting using the Tes t button.
If you press the Test button, an SMTP Test dialog appears. Enter the email
address you wish to send the test message. You can optionally modify the subject
and message to send. When ready, press the Send Test Message button to send
the text message.
When you have competed testing, click Close.
Click Next to continue.
SMTP Settings
SMTP Enabled Check this item to enable SMTP email delivery.
Server Enter the IP address or host name of the SMTP server. IP port 25
is used for all SMTP communications.
Server Required
Authentication
Check this item if your SMTP server requires a username and
password authentication.
Username Enter a valid username on the SMTP server.
Password Enter the password for the username on the SMTP server.
Email Address Enter an email address that all notifications from the RMS
application suite will be sent on behalf of.
Reply Email Address Enter the replay-to email address. Typically this is the same as the
Email Address.
Friendly Name Enter the display name you want to appear as the sender for
notification emails.