Technical information

Configuration Wizard
24
RMS Quick Start Guide
After completing these settings, click Next to continue.
Security
The next system settings section is the MeetingManager Security Settings. Here
you can determine if you want to require user authentication to access the RMS
application suite administrative web interface. If you want user authentication,
check the Enable User Account Management option.
If the Enable User Account Management option is checked, you can also choose
to allow anonymous access to view the RMS application suite administrative web
interface. To enable anonymous access, check the Allow Anonymous Access
option.
After completing these settings, click Next to continue.
NetLinx Server Settings
TCP/IP Server Port This field configures the IP port on which the RMS application suite
server accepts connections from NetLinx masters. The default port
is 3839, which is a IANA register port for RMS application suite
communications. If you are upgrading from a version 1.0 of
MeetingManager, you may wish to use port 9090. The
MeetingManager 2.0 server is fully backwards compatible with the
MeetingManager 1.0 NetLinx clients; however they will not take
advantage of the new features and optimizations of 2.0. If this value
is changed from one of the defaults, this new value must be
configured in each NetLinx system using the 'SERVER-' command.
Ping Delay Time The ping delay time is used to ensure that NetLinx clients are
connected to the RMS application suite server. On this configured
time interval, the RMS application suite server broadcasts request
messages to the NetLinx clients. If the NetLinx clients do not
respond within a specified amount of time, the MeetingManager
server assumes the connection has been lost and the NetLinx
system is offline. The default ping time is 30 seconds.
Ping Timeout Time The ping timeout time setting is used as the maximum amount of
time the MeetingManager server allows between NetLinx client ping
responses. If the NetLinx client does not return a ping response
within this amount of time, the RMS application suite server
assumes the connection has been lost and the NetLinx system is
offline. The default ping timeout time is 60 seconds.