Technical information

Getting Started
43
RMS Enterprise - NetLinx Programmer’s Guide
From the Hotlist or from the Client Gateway management page, an administrator can “Assign” the client gateway to an existing or
new location (FIG. 20).
If assigning to an existing location you will also be prompted with the opportunity to replace an existing client gateway
if this new client were a replacement for a defective control system master.
Otherwise, select Assign Client Gateway to simply add this as a new client in this location (FIG. 21).
FIG. 19 RMS Client Gateway Management page - Unregistered Client Gateways
FIG. 20 Assign Client Gateway
FIG. 21 Assign Client Gateway