Technical information

System Status Page
71
RMS - Administrator’s Guide
Modify Parameter Page
Make changes to existing device parameters via this page.
Reset - Resets all settings for the parameter to default values.
Save - Confirms the changes for the parameter changes and returns to the Device Parameter Page
Cancel - Exits to the Device Parameter Page without saving changes.
FIG. 70 Modify Parameter Page
Parameter Settings
• Name The friendly name of the parameter.
You cannot change the value of this parameter.
• Current Value The value of the parameter
• Threshold Operator A drop down selection the threshold designator for the parameter
• Threshold The threshold value.
• Status Type A drop down selection for the category to which the parameter belongs.
• Alert Template The notification template to use when the parameter's value is outside the normal
operating range.
Drop down selection of the types of alert templates available.
• Advise when parameter
returns to normal range
When checked, the RMS application sends a notification for a parameter when it
returns to its normal operating range.
• Advise Template The notification template to use when the parameter's value returns to the normal
operating range.
Drop down selection of the types of advise templates available.