Technical information

System Status Page
66
RMS - Administrator’s Guide
The NetLinx Device Information section contains information for the NetLinx device with which this device is
associated. For instance, if a projector is connected to NetLinx through an NXC-COM2 card, this table will
contain information about the NXC-COM2 card.
The Device RFID Tracking section contains information about tracking devices with associated RFID tags.
This section only appears if you enable the global option for RFID support in the RMS Configuration Wizard.
The checkboxes in the Device Logging section indicate if the device will report any errors to the various logs.
Green checks are enabled and red Xs are disabled.
See Also:
Internal Log Report Page section on page 148
Viewing a Device Log section on page 74
Device Information (Cont.)
• Move Click to move the device to a different room. This button is only visible if one of the following
conditions is true:
• The device is an unmanaged device and RFID Tag Tracking is disabled.
• The device is an unmanaged device and RFID Tag Tracking is enabled and is not currently
detected by any RFID reader in the system.
• The device is an unmanaged device and RFID Tag Tracking is enabled and the RFID
device portable option is disabled.
• Delete Click to delete the device. The system device cannot be deleted.
• Back (X) Return to the device list.
NetLinx Device Information
• Device Type The type of NetLinx device.
• Version The firmware version of the NetLinx device.
Note: This is not available for AxLink devices.
• Serial Number The serial number of the NetLinx device.
Note: This is not available for AxLink devices.
• Device Connection
Method
The connection type of this device (ICSNet, TCP/IP, or AxLink).
• This can be useful in diagnosing device connection problems.
• Device Address The physical address of the device.
• For ICSNet, this is the hardware address of the device on the ICSNet bus.
• For TCP/IP connections, this is the IP address of the device.
• For AxLink, this is "AxLink."
Device RFID Tracking
• Enabled Allows you to enable RFID tracking for the target device. The default value is Disabled.
• Tag ID Allows you to enter the RFID tag to associate with the target device.
• Portable Allows you to enable the RFID automatic location tracking for the target device. The default
value is Disabled.
• Track History Allows you to enables RFID tracking history for the target device. This option is only available
if you enable the global system RFID History Tracking option.The default value is Enabled.
Device Logging
• Syslog Green checks = enabled
Red Xs = disabled.
• Internal Log
• Windows Log
•SNMP Trap