Technical information

System Status Page
63
RMS - Administrator’s Guide
Each device can have one or more monitored parameters. They are collapsed within the table directly below
the device and contain the following information:
Create Device Page
The Create Device page allows you to enter device information for a monitored device (FIG. 64).
Access this page by clicking Create Device on the View Devices page.
Device List Monitored Parameters
• Name The name of the parameter being monitored.
• Current Value The current value for the parameter.
• Status This checkbox indicated if the parameter is operating within or outside of its threshold value.
The tool tip for this checkbox provides details about the threshold for the parameter.
• Status Type This is the status type with which the parameter is associated.
• View This link provides more details for the parameter settings and allows them to be modified.
See Device Parameter Page section on page 68
FIG. 64
Create Device Page