Technical information

RMS Configuration Wizard
33
RMS - Administrator’s Guide
After completing these settings, click Next to continue.
System Settings - SMTP
SMTP (Simple Mail Transport Protocol) is the standard for sending email on the Internet. RMS uses SMTP for
sending email notifications to users. Enter all the appropriate SMTP settings in the SMTP Email System screen
(FIG. 29).
You can test these SMTP setting using the Test button:
1. Press the Test button, to access the SMTP Test dialog (FIG. 30).
FIG. 29 RMS Configuration Wizard - SMTP Email System
SMTP Settings
• SMTP Enabled Check this item to enable SMTP email delivery.
• Server Enter the IP address or host name of the SMTP server.
IP port 25 is used for all SMTP communications.
• Server Required
Authentication
Check this item if your SMTP server requires a username and password authentication.
• Username Enter a valid username on the SMTP server.
• Password Enter the password for the username on the SMTP server.
• Email Address Enter an email address from which all RMS notifications will be sent (100 characters max).
• Reply Email
Address
Enter the reply-to email address.
Typically this is the same as the Email Address.
• Friendly Name Enter the display name you want to appear as the sender for notification emails.
FIG. 30
SMTP Test