Technical information

RMS Configuration Wizard
23
RMS - Administrator’s Guide
Click Next to proceed.
Licensing
RMS requires a Server serial number, and the appropriate client licenses to provide either Asset management
or Scheduling functions as desired (FIG. 16).
If the number of NetLinx connected systems is greater than the number of licenses available you can still track
them in the Unassigned NetLinx Systems section of the HotList. You will need more Client Licenses before
you can create rooms for these systems.
The RMS application can run without a license key. In Standard mode, you can run the RMS application with
limited capabilities for previewing the functionality of the software:
No rooms without masters
No control function macro creation, scheduling, or execution
No external scheduling
Only 1 user other than admin
Standard mode management limited to five rooms
Only one notification recipient
FIG. 15 RMS Configuration Wizard - RMS Application Suite Services Running
The AMX RMS Server service is the primary service. All other services depend on
this service; therefore it must always be started first and stopped last.
The Windows Services manager and the RMS Service Manager Utility will not allow
you to stop this service until all other services have been stopped.
When starting one of the other services first, the Windows Services manager and the
RMS Service Manager Utility will start the RMS Server service first.