Technical information

Configuration Page
155
RMS - Administrator’s Guide
See Also...
Internal Log Report Page section on page 148
Management - Internal Log Page section on page 95
Configuring the Internal Log
1.
Select Configuration > Internal Log in the menu on the left side of the RMS application. The Configure
Internal Log page opens.
2. Place a check in the box Internal Log Enabled to enable the internal log.
3. Type the maximum number of logs the RMS server is to keep in the field provided (Maximum Number of
Log Entries to Keep). The value 0 disables this feature.
4. Type the maximum number of days the RMS server is to keep in the field provided (Keep Log Entries for
Specified Number of Days). The value 0 disables this feature.
5. Click Save to save.
Enabling/Disabling Internal Log
1.
Select Configuration > Internal Log in the menu on the left side of the RMS application. The Configure
Internal Log page opens.
2. Place a check in the box Internal Log Enabled to enable the internal log. Remove the check to disable.
3. Click Save to save.
Purging the Internal Log
1.
Select Configuration > Internal Log in the menu on the left side of the RMS application. The Configure
Internal Log page opens.
2. If you select Delete all log entries no further information is needed and you can click Delete.
3. If you select Delete only log entries before this date:, select a date from the calendar below.
4. Click Delete to delete.
Internal Log (Cont.)
• Keep Log Entries for
Specified Number of Days:
This is the number of days log messages will be held in the RMS application
system.
The default value of 90 days allows administrators to browse past log mes-
sages and generate historical report while keeping storage requirements low.
If you would rather based the internal log size on number of messages, set this
value to 0.
• Purge Internal Log Entries
Delete all log entries This selection deletes all stored internal log entries from the RMS server.
Delete only log entries
before this date:
Use the calendar to select the start date of the purge.
• Total Existing Log Entries: The number of internal log entries currently residing on the RMS server.