Technical information

Management Page
91
RMS - Administrator’s Guide
Changing the Domain Path For Notifications
By default, when a notification is sent out the link does not utilize the fully qualified domain name. You can
change the domain path such that those outside of the immediate network can use the link. To change the host
name:
1. Stop all RMS services.
2. Run C:\Program Files\ AMX Resource Management Suite\Scripts\RMS Hostname.vbs
3. Click Ye s.
4. Enter the new hostname, e.g., rms.my-domain.com
5. Click OK.
6. Restart RMS services.
Management - Systems Page
The Management - Systems page allows you to browse the NetLinx masters connected to the RMS application
and inspect their configuration.
FIG. 83 Management - Systems Page
Management - Systems Page Options
• Serial Number Serial Number associated with the room.
• IP Address IP Address associated with the room.
• Host Name Host Name associated with the room.
• MAC Address The MAC address associated with the room.
• System Number This is the system number of the NetLinx master. The system number is used in master-to-
master configuration.
• Master Version This is the firmware version of the NetLinx master.
• Room Name The friendly name of the room in the event the NetLinx system is connected to the RMS
application.
• Online Displays whether this NetLinx system is connected to the RMS application.
• Secure This displays a locked icon if both the Telnet and HTTP server are not open to anonymous
access.
Note: An unlock icon means one or both of these services is available to any user.
• View This button provides more details on the NetLinx masters configuration. Launches the View
System Page.
This table can be sorted by Serial Number, IP Address, Host Name, System Number,
Module Name, Master Version, and System Online.