User Guide

Basic Operations
68
RMS CodeCrafter
Saving A Device Template File
Once you have created a Device Template it is necessary to save it order to keep changes made.
1. With the Device Template open, select File > Save.
2. Select the target location for the file and click Save.
Saving A Project File
Once you have created a RMS CodeCrafter file, it is necessary to save the file. You can then return
to the file at a later date.
1. With the project file open, select File > Save.
2. Select the target location to save the file.
3. Click Save.
Opening An Existing Device Template
You can create persistent templates for monitored devices, where you provide the settings and
parameters. RMS CodeCrafter can then use the device templates for similar or the same devices in
other projects.
If you already created a template, you can open and use it following these steps:
1. With RMS CodeCrafter wizard open to the Introductory page, click Open Device Template to
launch the Open RMS CodeCrafter Device Template window.
2. Select the template file (.CGT) you would like to use and click Open.
3. The wizard opens to Device Template Main page.
Follow these steps to edit your template:
1. Type the name of your Template in the field Template Name.
2. Type the manufacturer name in the field Manufacturer.
3. Type the model in the field Model.
4. Set a value for the Communications Timeout, measured in 1/10ths of a second, where 0 is a
valid value. If no timeout is required, use -1.
5. If you want to enable Control Failure Detect, place a check in the box next to it.
6. Click the radio button for the Support Module that fits your device template.
 Projector
 Transport
 Basic
 Slide Projector
 None
7. Click Next. The next page is Device Template Final page.
8. Within the Save Template to field, either type or click Browse to select the target location to
save your template file (.CGT).
9. Click Finish to create the template file and save it.