User Guide

AMX Lighting - Enclosure Worksheet Guide
2
AMX Lighting - Enclosure Worksheet Guide
Worksheet Layout
The worksheet is made of columns and rows of information and is divided into a top, middle, and bottom
section. Each Worksheet contains Rows and Columns. FIG. 2 shows the layout of a sample Worksheet
and their sections.
In the top section, the columns contain data and information required to configure the hardware and
describe the loads. The rows in the top are used for multiple channel descriptions contained in each slot
of the enclosure. The middle section is used for the two DIP switches. One for AXlink and one for
PROlink. It also has dealer information. The bottom section is used for special notes, features
descriptions, and serial numbers.
Cells
There are two main types of ‘cells’ that information is entered into. The first type of cell is a
Drop-Down menu of choices. These choices are the only valid choices for that cell. The next type of
information cell is a Text Box that allows the user to type in data to a specified area.
The worksheet's drop-down menus let you easily fill in required items in the appropriate place. A gray
shaded area indicates where a drop-down menu may be located (FIG. 3). Some fields or cells are text
fields (FIG. 4), which are used where selections cannot be accommodated with a simple drop-down
menu. Text fields have dark shading. Some fields allow more characters than others do.
You can use the TAB key (in the word document) and arrow keys to jump from field to field (cell to cell).
FIG. 2 Worksheet sections
ENCLOSURE CONTROL
CARD
MODULE AXlink
DEVICE #
PROlink
PACK #
DIM # DESCRIPTION / ZONE CURVE TYPE VOLTS LOAD (W)
RDA-ENC12B 96 1
120
1
120
1
120
1
120
Card DIP Switch 1 2 3 4 5 6 7 8
AMX Corp. 3000 Research Dr. Richardson, TX 75082
#1 SW1 PROlink
ON * * *
* * * OFF
DEALER ID
DATE
3/29/2002
#1 SW2 AXlink
* * * * * ON ON *
DEALER
#2 SW1 PROlink
* * * *
* * * *
JOB NAME
#2 SW2 AXlink
* * * * * * * *
SITE
#3 SW1 PROlink
* * * *
* * * *
SO#
PO#
#3 SW2 AXlink
* * * * * * * *
NOTES
SERIAL NUMBERS
ENC
1
2
3
4
5
6
SLOT 1
SLOT 2
SLOT 3
SLOT 4
SLOT 5
SLOT 6
ENCLOSURE CONTROL
CARD
MODULE AXlink
DEVICE #
PROlink
PACK #
DIM # DESCRIPTION / ZONE CURVE TYPE VOLTS LOAD (W)
RDA-ENC12B 96 1
120
1
120
1
120
1
120
Card DIP Switch 1 2 3 4 5 6 7 8
AMX Corp. 3000 Research Dr. Richardson, TX 75082
#1 SW1 PROlink
ON * * *
* * * OFF
DEALER ID
DATE
3/29/2002
#1 SW2 AXlink
* * * * * ON ON *
DEALER
#2 SW1 PROlink
* * * *
* * * *
JOB NAME
#2 SW2 AXlink
* * * * * * * *
SITE
#3 SW1 PROlink
* * * *
* * * *
SO#
PO#
#3 SW2 AXlink
* * * * * * * *
NOTES
SERIAL NUMBERS
ENC
1
2
3
4
5
6
SLOT 1
SLOT 2
SLOT 3
SLOT 4
SLOT 5
SLOT 6
TOP
MIDDLE
BOTTOM