User Guide

AMX Lighting - Enclosure Worksheet Guide

MX Lighting - Enclosure Worksheet Guide

MODULE Switches (right) uses a drop-down menu containing the switching choices listed

below:

 AXlink Device #: Enter the chosen or assumed AXlink device number. This is a text cell

with a default Device value of 96 and should be a three-character number from either 1 - 255.

If the device number is unknown then the field can be left blank. It is advisable to start device

number for AMX Lighting at Device # 96, whether it is the actual number used in the

program. A unique number entered here can flag the programmer to use a unique device

number in the Axcess program. There can be up to three AXlink devices on this sheet and the

PROlink can use the same AXlink device number and sequence its pack numbers. The DIP

switches in the middle section should reflect the number chosen in this cell. AXlink

DEVICE

uses a text field that allows three characters:

• blank • RDM-MDM

• RDD-DM4/120 • RDM-FDB

• RDD-DM4/240 • RDM-2FDB

• RDD-DM4/277 • RDM-3FDB

• RDD-DM6/120 • RDM-HFDB

• RDD-DM6/240 • RDM-DC

• RDD-DM6/277 • RDM-2DC

• RDM-INC • RDM-3DC

• RDM-2INC • RDM-HDC

• RDM-INC50

• blank • RDM-DPSM

• RDM-MDM • RDM-ZC

•RDM-SWM •RDM-2ZC

• RDM-2SWM • RDM-ZC50

• RDM-3SWM • RDA-EFP

• RDM-HSW • RDA-PSM

•RDM-2HSW

•RDM-3HSW

-Text field-