User`s manual

Chapter 7: BIOS
7-5
Type
Selects the type of IDE hard drive. The options are Auto (allows the
BIOS to automatically determine the hard drive's capacity, number of
heads, etc.), a number from 1-39 to select a predetermined type of hard
drive, CD-ROM and ATAPI Removable. The option- "User" will allow the
user to enter the parameters of the HDD installed at this connection. The
option-"Auto" will allow the BIOS to automatically configure the
parameters of the HDD installed at the connection. Choose the option"1-
39" to select a pre-determined HDD type. Select CD-ROM if a CD-ROM
drive is installed. Select ATAPI if a removable disk drive is installed.
Multi-Sector Transfers
Select the number of transfer sectors. The options are Disabled, 2, 4, 6,
8 and 16 Sectors.