User`s manual

Chapter 6: Advanced Chassis Setup
6-5
Figure 6-3. Removing the 12-cm Exhaust Fan
6-4 Drive Bay Installation
SCSI Drives
Five SCSI drives are housed in a mobile rack [CSE-M35(B)P]. The SCSI
drive IDs are preconfigured as 0 through 4 in order from right to left (or from
bottom to top if rackmounted).
Note: You must use standard 1" high, 80-pin SCA SCSI drives in the
SuperServer 7044A-82R.
Use extreme caution when working around the SCSI backplane.
Do not touch the backplane with any metal objects and make
sure no ribbon cables touch the backplane or obstruct the air-
flow.
!