User`s manual

5-10
SUPERSERVER 7044A-82R Manual
X6DA8-G2 Quick Reference
Jumper Description Default Setting
JBT1 CMOS Clear See Section 5-9
JP13 3rd Pwr Supply Alarm Enable/Disable Open (Disabled)
JP14 Pwr Supply Fail Alarm Reset Open (Disabled)
JPA1 SCSI Controller Enable/Disable Pins 1-2 (Enabled)
JPA2/JPA3 SCSI Ch. A/B Term. Enable/Disable Open(Enabled)
JPC1 Audio Enable/Disable Pins 1-2 (Enabled)
JPF Power Force On Open (Disabled)
JPL1 Giga-bit LAN Enable/Disable Pins 1-2 (Enabled)
JWD Watch Dog Enable Pins 1-2 (Reset)
Connector Description
J1B4 Primary 24-pin ATX PWR Connector
J1D1 12V 8-pin PWR Connector
COM1, COM2 COM1 and COM2 Serial Port Connectors
DIMM1A-4B Memory (SDRAM) Slots
FAN1-8 CPU FAN1/CPU FAN2/Chassis Fans Headers
J3/J4 IDE#1/#2 Disk Drive Connectors
J9 Keyboard/Mouse
J20 IPMI 2.0 Connector
J22 System Management Bus Connector
J23 Parallel (Printer) Port
J24 PWR System Management Bus
J32 12V 4-pin CPU PWR Connector
J40 Universal Serial Bus Ports 0-3 (backpanel ports)
JA1, JA2 Ultra320 SCSI Channel A, Channel B
JC1 Microphone Jack
JC2 Line In/Out Jacks
JD1 PWR LED (Pins1-3), Speaker (Pins 4-7)
JD2 Universal Serial Bus Ports 6/7 (front access ports)
JD3 Universal Serial Bus Ports 4/5 (front access ports)
JF1 Front Panel Control
JK1 Keylock
JL1 Chassis Intrusion Header
JOH1 Overheat LED
JP8 Floppy Disk Drive Connector
JP12 Power Fault Connector
JWOL Wake-on-LAN Header
JWOR1 Wake-on-Ring Header
LAN1/2 Gigabit Ethernet Ports