Setup guide

Appendix A Media Server Specifications

Electrical Specifications

The electrical specifications for the Media Server are as follows:

• Voltage — 115 or 230 V ac

• Frequency — 50 to 60 Hz

• Watts (Max. U.S.) — 300 W

Power Cord Specifications

Select the power cords for the Media Server according to the country

destination; power cords must comply with local safety requirements.

Use the following guidelines to replace the original cord set:

• CEE-22 requirements: Figure 6 shows the female receptacle of the

cord set, which must comply with CEE-22 requirements.

Figure 6 Receptacle (CEE-22)

• United States and Canada requirements: In the United States and

Canada, the male plug is a NEMA 5-15P style, and is UL listed and

CSA certified. Figure 7 shows the plug. You can use SVT cordage

with desktop, countertop, or rack-mount units; all other equipment

requires SJT cordage. You must use only SJT-type cord sets for units

that sit on the floor.

0550201A_BK.book Page 50 Thursday, January 9, 2003 10:44 AM