Setup guide

Chapter 5 Installing the Network Routing Switch
48
9. Set the domain by typing:
FastIron(config)# ip dns domain-name name
where name is the name of the domain where the switch is installed.
10. Set the DNS server IP address by typing:
FastIron(config)# ip dns server-address address
where address is the IP address of the DNS server.
11. Save all the changes in memory by typing:
FastIron(config)# write memory
12. Return to the EXEC level by typing:
FastIron(config)# end
FastIron#
Advanced FastIron Switch Configuration
For information on configuring the FastIron switch to operate with your
network configuration, see the Foundry Networks documentation provided
with your FastIron switch.
0550201A_BK.book Page 48 Thursday, January 9, 2003 10:44 AM