Setup guide

Connecting the Media Server Cables

Installing the Media Server Rack-Mount Rails

Follow the instructions supplied in the rail kit to install the Media Server

rack-mount rails ensuring that:

• The rails do not interfere with the power strips, power cords, or other

cables at the back of the rack.

• The bottom of the Media Server is at the bottom of a U-alignment

space.

• The rails allow the Media Server to slide completely into the rack.

Connecting the Media Server Power Cord

To connect the Media Server power cord:

1. Plug one end of the power cord into the top power connector on the

back of the Media Server.

2. Plug the other end of the power cord into the left power strip on the

back of the rack.

3. If the Media Server has a second power supply, plug the end of another

power cord into the bottom power connector on the back of the Media

Server.

4. Plug the other end of the second power cord into the right power strip

on the back of the rack.

Connecting the Media Server Cables

You need to connect the Media Server to a standard keyboard, mouse, and

monitor or to a keyboard, video, mouse switch (KVM); the

MEDIASwitch; and to your network. Do one of the following:

t If you are connecting a standard keyboard, mouse, and monitor to the

Media Server, continue with “Connecting a Media Server to a

Standard Monitor, Keyboard, and Mouse” on page 18.

t If you are connecting a KVM to the Media Server, continue with

“Connecting a Media Server to the KVM” on page 19.

0550201A_BK.book Page 17 Thursday, January 9, 2003 10:44 AM