Installation guide

- 9 -
FAULT +
MSTR/HEAD
+ CPLR/TAIL
Rotate
Blinking
Sequentially
ABC-02-USB is importing/exporting
files.
STATE +
FAULT +
MSTR/HEAD
+ CPLR/TAIL
Blinking 2 blinks per sec: The switch is being
discovered/located by MXview.
Ports
1 to 24
GREEN
On
Port’s 100 Mbps link is active
Blinking
Data is transmitting at 100 Mbps
Off
Port’s link is inactive
AMBER
On
Port’s 10 Mbps link is active
Blinking
Data is transmitting at 10 Mbps
Off
Port’s link is inactive
M1
Ports
1 to 4
GREEN
On
Port’s highest speed link is active
Blinking
Data is transmitting at the highest
speed
Off
Port’s link is inactive
AMBER
On
Port’s non-highest speed link is active
Blinking
Data is transmitting at non-highest
speed
Off
Port’s link is inactive
Specifications
Technology
Standards IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D-2004 for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1s for Multiple Spanning Tree Protocol
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP
Protocols
IGMP v1/v2, GMRP, GVRP, SNMPv1/v2c/v3, DHCP
Server/Client, BootP, TFTP, SNTP, SMTP, RARP,
RMON, HTTP, HTTPS, Telnet, SSH, Syslog, DHCP
Option 66/67/82, EtherNet/IP, Modbus/TCP, LLDP,
IEEE 1588 PTP V2, IPv6, NTP Server/Client, MMS
MIB
MIB-II, Ethernet-like MIB, P-BRIDGE MIB,
Q-BRIDGE MIB, Bridge MIB, RSTP MIB,
RMON MIB Groups 1, 2, 3, 9
Flow control
IEEE 802.3x flow control, back pressure flow control
Interface
Fast Ethernet
10/100BaseT(X) or 100BaseFX (SC/ST connector)
Gigabit Ethernet
10/100/1000BaseT(X), 1000BaseSX/LX/LHX/ZX
(SFP slot, LC connector)
Console Port
USB-serial console (Type B connector)
Storage port
USB storage port (Type A connector)
System LED
Indicators
STAT, PWR1, PWR2, FAULT, MSTR/HEAD, CPLR/TAIL