Setup guide

5-4
Installing and Configuring a Routing Network Switch
8. Set the switch default network gateway by typing:
FastIron(config)# ip default-gateway
address
where address is the IP address of a network gateway.
9. Set the domain by typing:
FastIron(config)# ip dns domain-name
name
where name is the domain name where the switch is installed.
10. Set the dns server IP address by typing:
FastIron(config)# ip dns server-address
address
where address is the dns server IP address.
11. Save all the changes to memory by typing:
FastIron(config)# write memory
12. Return to the EXEC level by typing:
FastIron(config)# end
FastIron#
Advanced FastIron Switch Configuration
See the Foundry documentation provided with your FastIron switch
for information on how to configure the switch to operate with your
network configuration.
0525701A_BK.book Page 4 Tuesday, April 16, 2002 9:25 AM