Setup guide

1-8
Installing a Media Server
n
You can install the GBIC while the MEDIASwitch is turned on.
4. Slide the GBIC into the MEDIASwitch port. You should hear the
retainer clips click when the GBIC is seated in the port.
5. Remove the protective covers from the optical connector on the
optical cable.
6. Remove the protective cover from the GBIC in the MEDIASwitch.
7. Attach the connector on the cable into the GBIC for the Media
Server (see Figure 1-3). Firmly push the plug on the cable into the
connectors on the optical GBIC.
Figure 1-3 MEDIASwitch Port Layout
8. Label the cable with the name or location of the Media Server to
which it connects.
Storage ports
File Manager ports Storage ports
100 RS232Act/Col
1
2
3
4
5
6
7 8
MGMT
100 RS232Act/Col
1
2
3
4
5
6
7 8
9
10
11
12
13
14
15 16
MGMT
MediaNet client ports
MediaNet client ports
File Manager ports
MediaNet client ports
7100
7200
0525701A_BK.book Page 8 Tuesday, April 16, 2002 9:25 AM