Setup guide

1-5
Connecting the Media Server Cables
Installing the Monitor
To connect the Media Server to a monitor:
1. Set the monitor on the desktop or shelf. Route the power cord and
cable to the back of the rack.
2. Plug the power cord into the back of the monitor.
3. Plug the power cord into the left power strip in the back of the
rack.
4. Plug the keyboard cable into the keyboard port on the back of the
Media Server.
5. Plug the mouse cable into the mouse port on the back of the Media
Server.
Connecting a Media Server to the KVM
To connect the a Media Server to a KVM:
1. Locate a KVM cable in the kit. It has a 25-pin connector on one
end, and a 9-pin connector, a keyboard connector and a mouse
connector on the other end.
2. Attach the 25-pin connector to a free port on the back of the KVM.
Secure the connector with the thumbscrews in the connector.
3. Attach the 9-pin connector to the video port on the back of the File
Manager. Secure the connector with the thumbscrews in the
connector.
4. Push the keyboard cable connector into the keyboard connector on
the back of the File Manager. The keyboard connector is at the
bottom-left of the connectors on the File Manager.
5. Push the mouse cable connector into the mouse connector on the
back of the File Manager. The mouse connector is directly above
the keyboard connector.
0525701A_BK.book Page 5 Tuesday, April 16, 2002 9:25 AM