Setup guide

1-3
Installing the Media Servers
Installing Media Server Rack-Mount Rails
When you are installing the Media Server rack-mount rails, follow the
instructions supplied in the rail kit to install the rails while ensuring
that:
The rails do not interfere with the power strips, power cords, or
other cables at the back of the rack.
The bottom of the Media Server is at the bottom of a U-alignment
space.
The rails allow the Media Server to slide completely into the rack.
Connecting the Media Server Power Cord
To connect the Media Server power cord:
1. Plug the power cord into the top power connector on the back of
the Media Server.
2. Plug the power cord into the left power strip in the back of the
rack.
3. If the Media Server has a second power supply, plug the power
cord into the bottom power connector on the back of the Media
Server.
4. Plug the power cord into the right power strip in the back of the
rack.
0525701A_BK.book Page 3 Tuesday, April 16, 2002 9:25 AM