User Guide

Appendix B: AMX Lighting Curves

AMX Lighting PROlink/AXlink Programming

FIG. 41 shows the output voltage of a RAD-MC120 dimmer. Curve D is an alternate version of

Curve A. It rolls off the high end slower and extends the dimming range in the middle with a sharp

roll off starting at 25% dimming level.

! Relay turn on level = 1%

! Dimming Range = 0 - 115 VAC

FIG. 42 shows the output voltage of the RAD-VDR module. Curve D is a variation of Curve A but

at a 10% reduction. This curve can be used with 0-10 VDC dimming ballasts using the proper low-

end cutoff.

FIG. 40 Curve C Voltage output in Volts DC

FIG. 41 Curve D Voltage output in Volts RMS

FIG. 42 Curve D Voltage output in volts DC