User Guide

Appendix B: AMX Lighting Curves

MX Lighting PROlink/AXlink Programming

FIG. 32 shows the output voltage of the RAD-VDR module. The low end starts at 4 volts and

slowly rises to 12 VDC. This curve provides precise mid-range dimming.

FIG. 33 shows the output voltage of a RAD-MC120 dimmer. Curve 9 starts at 70 volts and rises to

120 volts for a dimming range of 40%. This curve can be used to dim some fan motors. Use this

curve when very little voltage range can be tolerated.

! Relay turn on level = 1%

! Dimming Range = 72 - 120 VAC.

FIG. 34 shows the output voltage of the RAD-VDR module. Curve 9 starts at 5 volts and rises to 12

VDC. This provides a dimming range of 7 VDC.

FIG. 32 Curve 8 Voltage output in volts DC

FIG. 33 Curve 9 Voltage output in Volts RMS

FIG. 34 Curve 9 Voltage output in volts DC