User Guide

Appendix B: AMX Lighting Curves

AMX Lighting PROlink/AXlink Programming

FIG. 30 shows the DC output voltage of Curve 7 applied to the RAD-VDR module. It starts at 3

VDC and rises to 12 VDC.

FIG. 31 shows the output voltage of a RAD-MC120 dimmer. This curve follows the Standard

dimming curve (Curve 1) for the first 50% and then levels off to a 50 volts cut-off. This can be used

on Advance Mark X ballasts.

! Relay turn on level = 1%

! Dimming Range = 52 - 120 VAC.

FIG. 29 Curve 7 Voltage output in Volts RMS

FIG. 30 Curve 7 Voltage output in volts DC

FIG. 31 Curve 8 Voltage output in Volts RMS