User Guide

Appendix B: AMX Lighting Curves

AMX Lighting PROlink/AXlink Programming

Similar to Curve 1, Curve 2 rolls off at 90% of the top end or about 105 volts maximum. FIG. 19

shows a curve that reduces the maximum output to 90% of maximum to conserve energy. It is also

called the 'energy saving curve'.

! Relay turn on level = 1%

! Dimming Range = 0 - 114 VAC.

FIG. 20 shows the low-voltage output of the RAD-VDR module. The voltage range is from 0 to 9

VDC when attached to test ballast. This curve can be used with 0-10 VDC dimming ballasts.

FIG. 18 Curve 1 with Low End Setting @ 5%, 10%, and 20% Volts RMS

FIG. 19 Curve 2 voltage output in volts RMS

FIG. 20 Curve 2 voltage output in volts DC