User Guide

Product Information

PRO-DP16 Decor 16-Button PROlink Wall Panel

(via the rear-panel DIP switch), it is possible to have multiple PRO-DP16 panels in a Radia

Lighting system, without conflicts.

! For more information on setting offset values to the panel pushbuttons, refer to the Using

Switches 1, 2 and 3 to Set Button Offset Values section on page 16.

Packs

Packs refer to the Dimmer Control Cards (such as the RDD-DM4/DM6) and/or Integrated Dimmer

Modules (such as the RDC-DC/PDC). Each LED on the PRO-DP16 zone/channel LED indicator

represents one lighting channel/zone (1-6).

The PRO-DP16 controls up to 10 Packs; each individual Pack housing up to 6 lighting channels.

Each Pack is connected to the PRO-DP16 via PROlink cable. The PROlink cable provides power to

the PRO-DP16 panel, and communication between the panel and pack(s).

! For information on setting pack number assignments on the PRO-DP16 panel, refer to the

Assigning Pack numbers (1-6) on the PRO-DP16 panel section on page 7.

Default presets on the dimmer packs

Radia Dimmer Cards and Integrated Dimmer Control Cards (Packs) have 8 contact closures, pre-

programmed with default presets. By default, the dimmer packs ship with the following presets for

each contact closure:

Dry Closure Default Presets

Contact Closure Default Function

1 Channel 1 at 100% in 1 second*

2 Channel 2 at 100% in 1 second*

3 Channel 3 at 100% in 1 second*

4 Channel 4 at 100% in 1 second*

5 Channel 5 at 100% in 1 second*

6 Channel 6 at 100% in 1 second*

7 Pack on (channels 1-6)*

8 Pack on (channels 1-6)*

*All other channels are undefined