User Guide

Panel Programming/Operation

PRO-DP16 Decor 16-Button PROlink Wall Panel

5. Press Off (pushbutton 12) to record the Dimmer Curve setting.

6. The panel automatically exits Curve Select mode.

Low-End Mode

The panel must be in Low-End mode in order to record low-end settings for the Packs. To enter

Low-End mode:

1. Enter Program mode (indicated by the PGM LED).

2. Press Mode (pushbutton 16) three times.

3. Low End mode is indicated by the LE LED.

Recording Low-End settings

1. Select the Pack that you want to record Low-End settings for.

2. Select the Channel that you want to record Low-End settings for on.

3. Enter Program mode (indicated by the PGM LED).

4. Enter Low-End mode (indicated by the LE LED).

5. Use the pushbuttons to enter a number between 0 and 99, to specify the low-end setting for the

selected channel, in percentage points.

For example, press pushbutton 6 for 6%; press pushbuttons 1 then 5 for 15%.

6. Press Off (pushbutton 12) to record the low-end setting.

For example, to select curve 10 (Non-dim in the following chart) you must press "1",

then "0", then "Off". Pressing "10" then "Off" does not work.

Dimmer Curves and Keypad Values

Curve number Keypad number Description

1 1 Standard Curve

2 2 Economy Curve

3 3 Advance MARK VII ballast

4 4 PRESCOLITE Intellect ballast

55% Rolloff

66% Roll Off

7 7 30 % Roll Off

8 8 Advance MARK X ballast

9 9 50% Roll Off; Fans

N10NON-DIM

O11Always Off

F12Always On

A 13 Modified Standard Curve

B 14 Transformer 1

C 15 Transformer 2

D 16 Slow Fade, High End

E 17 MDM module