Specifications

Appendix A: Telnet Commands
77
NXV-300 Modero Virtual Touch Panel
Terminal Commands (Cont.)
Command Description
PING [ADDRESS] Pings an address (IP or URL), to test network connectivity to and con-
firms the presence of another networked device. The syntax is just like
the PING application in Windows or Linux.
Example:
>ping 192.168.29.209
192.168.29.209 is alive.
REBOOT Reboots the NXV-300.
Example:
>REBOOT
Rebooting...
RELEASE DHCP Releases the current DHCP lease for the NXV-300.
Note: The NXV-300 must be rebooted to acquire a new DHCP lease.
Example:
>RELEASE DHCP
SET DNS Sets up the DNS configuration.
This command prompts you to enter a Domain Name, DNS IP #1,
DNS IP #2, and DNS IP #3.
Then, enter Y (yes) to approve/store the information in the NXV-300.
Entering N (no) cancels the operation.
Note: The device must be rebooted to enable new settings.
Example:
>SET DNS
-- Enter New Values or just hit Enter to keep current
settings --
Enter Domain Suffix: amx.com
Enter DNS Entry 1 : 192.168.20.5
Enter DNS Entry 2 : 12.18.110.8
Enter DNS Entry 3 : 12.18.110.7
You have entered: Domain Name: amx.com
DNS Entry 1: 192.168.20.5
DNS Entry 2: 12.18.110.8
DNS Entry 3: 12.18.110.7
Is this correct? Type Y or N and Enter -> Y
Settings written. Device must be rebooted to enable 
new settings
SET IP Sets the IP configuration.
Enter a Host Name, Type (DHCP or Fixed), IP Address, Subnet Mask,
and Gateway IP Address.
Note: For NetLinx Central Controllers, the "Host Name" can only

consist of alphanumeric characters.
• Enter Y (yes) to approve/store the information into the NXV-300.
• Enter N (no) to cancel the operation.
Note: The NXV-300 must be rebooted to enable new settings.
Example:
>SET IP
--- Enter New Values or just hit Enter to keep current settings ---
Enter Host Name: MLK_INSTRUCTOR
Enter IP type. Type D for DHCP or S for Static IP and then Enter:
DHCP
Enter Gateway IP: 192.168.21.2
You have entered: Host Name MLK_INSTRUCTOR
Type DHCP
Gateway IP 192.168.21.2
Is this correct? Type Y or N and Enter -> y
Settings written. Device must be rebooted to enable new settings.
SET TELNET PORT Sets the IP port listened to for telnet connections.