Specifications

NetLinx Programming
40
NXV-300 Modero Virtual Touch Panel
"^" Button Commands
These Button Commands are used in NetLinx Studio and are case insensitive.
All commands that begin with "^" have the capability of assigning a variable text address range and
button state range. A device must first be defined in the NetLinx programming language with values
for the Device: Port: System (in all programming examples - Panel is used in place of these values).
Variable text ranges allow you to target 1 or more variable text channels in a single
command.
Button State ranges allow you to target 1 or more states of a variable text button with a single
command.
 "." Character is used for the 'through' notation, also the "&" character is used for the 'And'
notation.
TPD4 Border Styles by Name (Cont.)
No. Border styles No. Border styles
141 Menu Left Rounded 55 149 Menu Left Rounded 135
142 Menu Left Rounded 65 150 Menu Left Rounded 145
143 Menu Left Rounded 75 151 Menu Left Rounded 155
144 Menu Left Rounded 85 152 Menu Left Rounded 165
145 Menu Left Rounded 95 153 Menu Left Rounded 175
146 Menu Left Rounded 105 154 Menu Left Rounded 185
147 Menu Left Rounded 115 155 Menu Left Rounded 195
148 Menu Left Rounded 125
"^" Button Commands
^ANI
Run a button 
animation (in 1/10
second).
Syntax:
"'^ANI-<vt addr range>,<start state>,<end state>,<time>'"
Variable:
variable text address range = 1 - 4000.
start state = Beginning of button state (0= current state).
end state = End of button state.
time = In 1/10 second intervals.
Example:
SEND_COMMAND Panel,"'^ANI-500,1,25,100'"
Runs a button animation at text range 500 from state 1 to state 25 for 10 second.