Specifications

Setup Pages and Descriptions

NXV-300 Modero Virtual Touch Panel

System Settings - Master Tab

The Master tab of the System Settings page contains the necessary information for connecting to the

network Master.

The elements of the System Settings page - Master Tab are as follows:

System Settings Page - IP Tab Elements (Cont.)

Primary DNS Sets the address of the primary DNS server used for host name lookups.

• DNS (Domain Name System) is software that lets users locate computers on

a local network or the Internet (TCP/IP network) by host and domain. The

DNS server maintains a database of host names for its domain and their

corresponding IP Addresses.

Secondary DNS Sets a secondary DNS value to the panel.

Domain Sets the unique name on the Internet to the panel for DNS look-up.

• The panel belongs to the DNS domain.

Ethernet Mode Sets the speed of the Ethernet connection to the panel.

• Choices are: Auto, 10 Half Duplex, 10 Full Duplex, 100 Half Duplex, or 

100 Full Duplex.

MAC Address Displays a read-only field that is factory set by AMX for the built-in Ethernet

interface.

Save & Reboot: Saves any changes and reboots the device in order to implement those

changes.

Cancel: Returns to the previous page without saving any changes.

FIG. 18

System Settings page - Master Tab

System Settings Page - Master Tab Elements

Connection Status icon: This visual display of the connection status allows the user to have a current

visual update of the panel’s connection status, regardless of what page is 

currently active.

• A Lock only appears on the icon if the panel has established a connection

with a currently secured target Master, which requires a username and

password.

Type: Sets the NetLinx Master to communicate with the panel via Ethernet. This is

based on the cable connection from the rear.

• Ethernet is a CAT-5 cable (10/100Base T terminated in an RJ-45 connector)

used to network computers together and is used in most LAN (local area

networks).