Specifications

Setup Pages and Descriptions

NXV-300 Modero Virtual Touch Panel

System Settings Page

The System Settings page (FIG. 17) sets Primary and Secondary DNS Address information with its

corresponding IP communication parameters, sets NetLinx Master communication settings, and reads

the device number assigned to the Modero panel. Select between the IP and Master tabs to view the

appropriate information.

System Settings Page - IP Tab

The IP tab is the default tab on the System Settings page. This tab contains the main IP and MAC address

information for the panel.

The elements of the System Settings page - IP Tab are as follows:

Changes made on any tab of this page are not saved until the panel is rebooted.

FIG. 17 System Settings Page - IP Tab

System Settings Page - IP Tab Elements

Connection Status icon: This visual display of the connection status allows the user to have a current

visual update of the panel’s connection status, regardless of what page is 

currently active.

• A Lock only appears on the icon if the panel has established a connection

with a currently secured target Master, which requires a username and

password.

DHCP/Static Sets the panel to either DHCP or Static communication modes.

• DHCP (Dynamic Host Configuration Protocol) assigns IP Addresses from

client stations logging onto a TCP/IP network via a DHCP server.

• Static IP is a permanent IP Address that is assigned to a node in a TCP/IP

network.

IP Address Sets the IP Address assigned to the panel.

Subnet Mask Sets a subnetwork address to the panel.

• Subnetwork mask is the technique used by the IP protocol to filter messages

into a particular network segment (Subnet).

Gateway Sets a gateway value to the panel.

• Gateway is a computer that either performs protocol conversion between

different types of networks/applications or acts as a go-between two or more

networks that use the same protocols.

Host Name Sets the host name of the panel.