Specifications

Setup Pages and Descriptions
17
NXV-300 Modero Virtual Touch Panel
Protected Setup Page
The Protected Setup page (FIG. 13) centers around the properties used by the panel for proper
communication with the NetLinx Master. Enter the factory default password (1988) into the password
keypad (please refer to the Password Page section on page 24 for more information) to access this page.
The elements of the Protected Setup page are described in the table below:
FIG. 13 Protected Setup Page
Protected Setup Page Elements
Connection Status icon: This visual display of the connection status allows the user to have a current
visual update of the panel’s connection status regardless of what page is 
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master, requiring a username and password.
Device Information: Device Number: Opens a keypad that is used to set and display the current
device number.
Device/Bonjour Name: Opens a keypad that is used to set and display the
current device name.
Reboot: • Press this button to restart the panel after saving any changes.
Bonjour: • Press this button to enable or disable broadcast of any Zero Config
information. NOTE: The device must be rebooted for the change to take
effect.
Function Show: • Press this button to enable the display of the channel port and channel code
in the top left corner of the button, the level port and level code in the bottom
left corner, and the address port and address code in the bottom right corner
(FIG. 15).
Telnet: • Press this button to enable or disable the telnet server on the panel. This
feature focuses on direct telnet communication to the panel.
Page Tracking: • Press this button for the touch panel sends page data back to the NetLinx
Master, or vice versa depending on the touch panel settings.
System
Panel
Statistics
Settings
G4 Web
Control
Settings
Connection
Utility
Password