Specifications
Setup Pages and Descriptions
11
NXV-300 Modero Virtual Touch Panel
Status
The Status page (FIG. 7) is the first page viewed when entering the Setup page interface from the main
touch panel pages. The Status page may be reached by pressing and holding down the Reset button on
the front of the device for six seconds.
The elements of the Status page are described in the table below:
FIG. 7 Status Page
Status Page Elements
Connection Status icon: This visual display of the connection status allows the user to have a current
update of the panel’s connection status regardless of what page is currently
active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
Connection Status: Displays whether the panel is communicating externally, the encryption status
of the communicating Master, what connection type is being used (Ethernet
only), and of what System the panel is a part.
This visual display of the connection status is also reflected at the upper-right of
each firmware page. This allows the user to have a current visual update of the
panel’s connection status regardless of what page is currently active.
• The word "Encrypted" appears only when an encrypted connection is
established with a target Master. Otherwise, the status reads "No
Encryption".
• When a connection is established, the message displayed is: "Connected via
Ethernet ".
• If no connection can be established by the Modero panel, it will continue to try
and establish a connection while displaying: "Attempting via...".
• The panel must be rebooted before incorporating any panel communication
changes and detecting any active Ethernet connections.
The Ethernet connection is only detected after the panel is rebooted.
Display: • This button opens the Display page (page 12).
Info: • This button opens the Panel Information page (page 13).
Protected Setup: • This button opens the Protected Setup page (page 17).
Current Time/Date • The time and date in these fields are provided by the Master.
Exit: Returns to the Main touch panel page. In this case, the previous page is the
default Main page.
Display
Current time
Date
Protected Setup
Info