Specifications

Installation
8
NXV-300 Modero Virtual Touch Panel
PoE (Power Over Ethernet)
The NXV-300 uses CAT5/CAT6 wire via the Ethernet port for PoE power. The maximum power draw for the
NXD-300 is 2.2 watts.
Use the PS-POE-AF Power over Ethernet Injector (FG423-80) to simplify wiring and installation by
eliminating the need for an AC outlet at each point of installation.
If used with a non PoE-capable Ethernet switch, then an optional PS-POE-AF Power-over-Ethernet
(PoE) power supply is required to provide power to the NXV-300.
If the NXV-300 is used with a PoE-capable Ethernet switch, then no PoE Injectors are required.
The NXV-300 can be placed up to approximately 330’ (100 meters) from PoE
Injector.