Specifications

Setup Pages and Descriptions
70
NXD-700i & NXT-CA7 7” Modero Touch Panels
Using the Connection Utility
1.
From the Protected Setup page, press the Tools button. This opens the Tools menu.
2. Within the Tools menu, press the Connection Utility button to launch the Connection Utility popup.
3. The Connection Information notes the IP of the connected master and the IP of the panel. The
Connection Statistics show the current quality of the panel connection.
4. Push Close when finished.
Connection Status icon: The icon in the upper-right corner of the utility provides a constant visual i
indication of current connection status.
A message is sent to the master once per second and expects a response.
• If it is received, the button stays green.
• If it is missed, the button goes yellow.
• After three misses (3 seconds), it will go red until a response from the master
is received, and then it will be green again.
Once per second, a user can know if the immediate area is a good wireless
area (all green), an area of limited coverage (lots of yellow, some green, some
red), or an area with no coverage (all red).
Connection Information
Master IP The IP Address for the connected master.
Panel IP The IP Address for the panel.
Connection Statistics
Messages Sent The number of messages sent from the panel to the master.
Responses Received The number of responses the panel has received from the master.
Responses Missed The number of expected responses from the master to the panel missed.
Close: Press this button to close the popup window and return to the Protected Setup
page.