Manualshelf

Technical information

ManualsBrandsAMX ManualsComputer equipmentNXR-ZRP
31323334353637383940
NXR-ZGW-PRO Configuration Pages
26
NXR-ZGW-PRO NetLinx ZigBee Pro Gateway & NXR-ZRP-PRO NetLinx ZigBee Pro Repeater
1. In the menu on the top of the NXR-ZGW Browser-Based Configuration Manager, select Network under
the section Pan.
2. Click Accept.
3. Select the Connections tab; the repeater should appear on the gateway.
4. Click on the EUI-64 link to open the Device Details page.
5. In the Extended PAN ID field, enter the desired Extended PAN ID for the repeater within the network.
This field defaults to the current network to which it is joined.
6. Click Update Settings.
7. Repeat steps 1-6 for each repeater to be added to the network.
8. Select the Network tab under the section Pan and enter the desired Extended PAN ID in the PAN ID field.
9. Click Accept.
Setting the PAN Channel
1. In the menu on the top of the NXR-ZGW Browser-Based Configuration Manager, select Network under
the section Pan.
2. Click the radio button to Disable the wireless network. This activates the Country/Region and Channel
dropdown menus.
3. Select your country or region of operation from the Country/Region drop down menu.
4. Select the Channel number from the Channel drop down menu. The selection of "Any" allows the radio to
scan for the channel with the least interference and form the PAN on that channel.
5. Click Accept.
Personal Area Network (PAN) - Connections tab
Click the Connections tab of the Personal Area Network (PAN) page to access the Connections options. All
devices connected to the NXR-ZGW-PRO are displayed on this page.
FIG. 16 Personal Area Network (PAN) - Connections tab
Personal Area Network (PAN) - Connections tab options
No. The Netlinx ID number.
EUI-64 The 64-bit ZigBee EUI address of the device.
Description The device's description, supplied by the device. If none is entered, the description defaults to
"Blank".
Type The specific type of device being accessed.
Power Source The source of power currently being used by the device. "Mains" means that the handheld
device is in its charging cradle.
Power Level The current charge on the handheld device’s battery.
Status The current status of the device: either "Active" or "Standby".