Technical information
NXR-ZGW-PRO Configuration Pages
22
NXR-ZGW-PRO NetLinx ZigBee Pro Gateway & NXR-ZRP-PRO NetLinx ZigBee Pro Repeater
Configuration - NetLinx Settings tab
Click the NetLinx Settings tab of the Configuration page to access the NetLinx Settings options. The options
in this tab are used to view or edit the NetLinx settings for this gateway (FIG. 12):
Editing NetLinx Settings
1. In the menu at the top of the NXR-ZGW Browser-Based Configuration Manager, select NetLinx Settings
under the section Configuration.
2. The Connection field cannot be changed from this page.
3. Select between the choices in the Mode dropdown menu for the desired NetLinx mode.
4. Enter the network system number in the System Number field (Automode only).
5. Enter the device number in the Device Number field.
FIG. 12 NetLinx Settings Page
Configuration - NetLinx Settings tab options
Connection The mode in which the connection to the master is being made. Default: ID Mode.
Mode The NetLinx mode being used. Selected from:
•TCP Auto
• TCP URL
•TCP Listen
• UDP URL
System Number The number for the NetLinx network
Device Number The network number assigned to the device
Master IP/URL: The IP address or URL assigned to the master
Master Port Number The port used by the master
Security The current selected security setting for the network:
• None
• Authenticated
• Encrypted
Note: Security settings are determined by the master, and cannot be changed from
this page. For more information, refer to the security setup information for the
master.
Username The user name registered with the master
Password The password registered with the master.