Technical information

NXR-ZGW-PRO Configuration Pages
19
NXR-ZGW-PRO NetLinx ZigBee Pro Gateway & NXR-ZRP-PRO NetLinx ZigBee Pro Repeater
Checking the Firmware Version
The firmware version is listed on the Summary of Gateway Settings page of the NXR-ZGW Browser-Based
Configuration Manager.
Checking the ZigBee Firmware Version
The ZigBee firmware version is listed on the Summary of Gateway Settings page, at the bottom of the page.
Determining the IP Settings of the NXR-ZGW-PRO
The IP settings are listed in the IP Settings section.
Finding the ICSP Device Number of the NXR-ZGW-PRO
The ICSP device number is listed under the System Connection, Device ID section.
Determining the PAN Settings of the NXR-ZGW-PRO
The PAN settings are listed in the PAN Settings section.
Determining the ZigBee Stack Profile
The Zigbee Stack Profile lists the version of the ZigBee protocol currently running on the NXR-ZGW-PRO.
This will always be "2".
Rebooting the NXR-ZGW-PRO
Click the Reboot button on the left bottom of the Summary of Gateway Settings page.
Configuration
Click the Configuration button (FIG. 10) to access the tabbed Configuration page.
The tabs contained in the Configuration page are:
IP Settings - Click to open the Network IP Settings tab (see the Configuration - Network IP
Settings tab section on page 20)
NetLinx Settings - Click to open the Network IP Settings tab (see the Configuration - NetLinx
Settings tab section on page 22)
User Settings - Click to open the Network IP Settings tab (see the Configuration - User Settings
tab section on page 23)
Summary of Gateway Settings Page (Cont.)
Pan Settings
Wireless The state (Disabled/Enabled) of the wireless connection.
Channel The ZigBee wireless channel used.
Extended Pan ID The ZigBee personal area network ID used. Represented as "AZGXXXXX," where
"XXXXX" are the last five numbers of the device's serial number.
EUI The Extended Unique Identifier. This is the ZigBee equivalent of a MAC address, as it
identifies the ZigBee hardware address for the gateway.
Preshared Key The current use of a user-defined preshared key (Disabled/Enabled).
Access List The current state of the Access List (Disabled/Enabled).
Pan ID The number assigned to the device’s PAN network.
ZigBee Stack Profile The version of the ZigBee protocol running on the device.
• 1 = ZigBee 2004
• 2 = ZigBee 2007
FIG. 10
Configuration Button