User Manual
Table Of Contents
- NXR-ZGW/-ZRPNetLinx ZigBee Compatible Gatewayand Repeater
- Overview
- Installation
- Setting up a Network
- NXR-ZGW Browser-based Configuration Manager Pages
- Summary of Gateway Settings
- Configuration
- Personal Area Network (PAN)
- Network
- Enabling and disabling the wireless network
- Setting the PAN channel
- Security
- Access List
- Connections
- Finding a device’s EUI address
- Finding the device’s description
- Determining the device type
- Finding the amount of time a signal takes from the device to the gateway and back
- Determining the device link quality
- Checking the device link status
- PAN Device Details
- Putting a device on the Access List
- Removing a device from the Access List
- Locating the device
- Changing a Connected Device description
- Changing a device’s ZigBee networking information
- Utilities
- Device Configuration
NXR-ZGW Browser-based Configuration Manager Pages
25
NXR-ZGW/-ZRP
Utilities
Device Firmware
The device details page shows all the information about the status of firmware on a network’s devices.
Allowing firmware updates to individual devices
1.
In the menu on the top of the NXR-ZGW Browser-based Configuration Manager, select Device
Firmware under the section Utilities.
FIG. 14 Device Firmware Page
Device Firmware
Updates Permissions to allow firmware uploads to the selected device.
EUI-64 The 64-bit EUI address of the device.
Description The name and location of the device, as provided by the device.
Status The current activity of the device, whether active or asleep.
Version The last uploaded version of the ZigBee firmware.
Uploads
Allowed
Displays whether or not the device may have further upgrades to its firmware.