User Manual
Table Of Contents
- NXR-ZGW/-ZRPNetLinx ZigBee Compatible Gatewayand Repeater
- Overview
- Installation
- Setting up a Network
- NXR-ZGW Browser-based Configuration Manager Pages
- Summary of Gateway Settings
- Configuration
- Personal Area Network (PAN)
- Network
- Enabling and disabling the wireless network
- Setting the PAN channel
- Security
- Access List
- Connections
- Finding a device’s EUI address
- Finding the device’s description
- Determining the device type
- Finding the amount of time a signal takes from the device to the gateway and back
- Determining the device link quality
- Checking the device link status
- PAN Device Details
- Putting a device on the Access List
- Removing a device from the Access List
- Locating the device
- Changing a Connected Device description
- Changing a device’s ZigBee networking information
- Utilities
- Device Configuration
NXR-ZGW Browser-based Configuration Manager Pages
22
NXR-ZGW/-ZRP
PAN Device Details
From both the Pan Security Settings and the Connections pages, clicking on a device’s EUI-64 number
opens the PAN Device Details page.
Each device provides the following:
FIG. 13 PAN Device Details Page
PAN Device Details Page
Device Options • On Access List: Controls whether the device is on the access list for the Connections
page.
• Locate: Finds the location of the device if active.
Connected Device • Device Type: The type of network device.
• Device Description: Description of the device as entered on PAN.
• Status: Whether the networked device is active or asleep.
Device Networking • EUI-64: The 64 bit ZigBee EUI address of the device.
• Node ID: The ID number of the network node closest to the device.
• Link Quality: The quality of the connection to the network.
• Traffic: The traffic byte count of the device.
• Latency: A measure of the amount of time (in milliseconds) for a message round-trip
from the device to the gateway and back.
Device Information • Power Sources: All of the possible sources for power for the device, including mains
electric power and battery backup
• Current Power: Current power source being used by the device.
• Power Level: Amount of required power being received by the device.
• Host F/W Version: Latest firmware version installed in the device.
• Node Type: The type of node used by the device.