User Manual
Table Of Contents
- NXR-ZGW/-ZRPNetLinx ZigBee Compatible Gatewayand Repeater
- Overview
- Installation
- Setting up a Network
- NXR-ZGW Browser-based Configuration Manager Pages
- Summary of Gateway Settings
- Configuration
- Personal Area Network (PAN)
- Network
- Enabling and disabling the wireless network
- Setting the PAN channel
- Security
- Access List
- Connections
- Finding a device’s EUI address
- Finding the device’s description
- Determining the device type
- Finding the amount of time a signal takes from the device to the gateway and back
- Determining the device link quality
- Checking the device link status
- PAN Device Details
- Putting a device on the Access List
- Removing a device from the Access List
- Locating the device
- Changing a Connected Device description
- Changing a device’s ZigBee networking information
- Utilities
- Device Configuration
NXR-ZGW Browser-based Configuration Manager Pages
19
NXR-ZGW/-ZRP
Security
The Security page allows and sets the method by which devices connect to the PAN.
Access List
The Access List catalogues all of the available devices currently running through the Personal Access
Network. This section allows the user to view the attributes of devices connected via the PAN.
1. In the menu on the top of the NXR-ZGW Browser-based Configuration Manager, select Security
under the section Pan.
2. To view details on a particular device in the Access List, click on the link in the device’s EUI-64
number. This opens the PAN Device Details page for the particular device.
FIG. 11 Pan Security Settings Page
Pan Security Settings Page
Security Enables or disables the ZigBee security.
AES Key This is the security key used by the ZigBee network. This field is currently greyed
out.