User Manual
Table Of Contents
- NXR-ZGW/-ZRPNetLinx ZigBee Compatible Gatewayand Repeater
- Overview
- Installation
- Setting up a Network
- NXR-ZGW Browser-based Configuration Manager Pages
- Summary of Gateway Settings
- Configuration
- Personal Area Network (PAN)
- Network
- Enabling and disabling the wireless network
- Setting the PAN channel
- Security
- Access List
- Connections
- Finding a device’s EUI address
- Finding the device’s description
- Determining the device type
- Finding the amount of time a signal takes from the device to the gateway and back
- Determining the device link quality
- Checking the device link status
- PAN Device Details
- Putting a device on the Access List
- Removing a device from the Access List
- Locating the device
- Changing a Connected Device description
- Changing a device’s ZigBee networking information
- Utilities
- Device Configuration
NXR-ZGW Browser-based Configuration Manager Pages
18
NXR-ZGW/-ZRP
Personal Area Network (PAN)
Network
The Network page allows you to modify the status of the Personal Area Network.
Enabling and disabling the wireless network
1.
In the menu on the top of the NXR-ZGW Browser-based Configuration Manager, select Network
under the section Pan.
2. Click the radio button next to Enable to enable the wireless network or select Disable to disable the
network.
3. Click Accept.
Setting the PAN channel
1.
In the menu on the top of the NXR-ZGW Browser-based Configuration Manager, select Network
under the section Pan.
2. Click the radio button to Disable the wireless network. This activates the Country/Region and
Channel dropdown menus.
3. Select your country or region of operation from the drop down menu.
4. Select the Channel number from the drop down menu.
5. Click Accept.
FIG. 10 Network Page
Network Page
Network status Lists whether the network is online or offline.
Wireless Enables or disables the ZigBee wireless networking.
PAN ID The current PAN ID number for the device.
Country/Region Drop down menu; sets ZigBee region (US, Europe, Japan).
Channel Drop down menu; sets the ZigBee operating channel between 11 and 26. The default
channel is 26.